2 Ch, mA-V Input, mA-V Output, SW Programmable

12-24 Vdc

2

The D1052D converts two voltage or current inputs from separately powered sources, located in Hazardous Location, and repeats, with isolation, the signals to drive two independent Safe Area loads. Output Signals can be direct or reverse. All settings are easily programmable via software. Approved for Div. 2 installation.

4-20 mA / 0-20 mA or 1-5 V / 0-5 V / 0-10 V from external powered Tx or other instruments.

4-20 mA/0-20 mA or 1-5 V/0-5 V or 2-10 V/0-10 V output signal totally isolated from Input and Supply.

2 channels I.S. input from separately powered transmitters. Provides 3 port isolation (input/output/supply) and current or voltage output signal.

High density with 2 independent channels.
Fully software programmable.
0-20 / 4-20mA or V input.
Input values scalable to adjust sensor errors.
Both sink or source output
mA or V output.
600 Ohm output load capability.