We are using cookies to give you the best experience on our site. Cookies are files stored in your browser and are used by most websites to personalise your navigation. By clicking the Accept button or continuing to browse, you agree with our use of cookies. Click here for more information.
GM International
Log in or Sign up |          


Products:
 

D1064S

Code:

D1064S

Products comparison or request a quotation
Name:

1 Ch, Load Cell / Strain Gauge Bridge Isolating Converter, SIL 2

Type:

Load Cell Isolator Converter

Show similar products
Supply:

24 Vdc nom (20 to 30 Vdc)

Field device:

Show similar products
Channels:

1

Description:

The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Converter D1064S acts as a galvanically isolated interface installed between a PLC/DCS in Safe Area and a load cell (or group of load cells) in Hazardous Area. Up to four 350 Ω load cells, or five 450 Ω load cells, or ten 1000 Ω load cells can be connected in parallel. It provides a fully floating power supply voltage with remote sensing capabilities to load cells located in Hazardous Area and converts the mV signal from the load cell into a 0/4-20 mA or 0/1-5 V or 0/2-10 V signal according to user desired range. Output circuit provides both current source and sink capabilities. Modbus output is also provided to interface PLC/DCS using digital communication.

Hazardous area:

Up to four 6 wire paralleled load cells 350 Ohm, 5 V, 60 mA total capacity.

Safe area:

4-20 mA/0-20 mA or 1-5 V/0-5 V or 2-10 V/0-10 V output signal totally isolated from Input and Supply. Modbus Output also provided.

Function:

1 channel I.S. input from strain gauge signals, provides 3 port isolation (input/output/supply) and current (source or sink mode) or voltage output signal. Modbus output also provided to interface digital device.

Features:

• Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
• Strain Gauge Bridge Isolated Converter.
• Up to four 350 Ω load cells in parallel or up to five 450 Ω load cells in parallel or up to ten 1000 Ω load cells in parallel.
• 0/4-20 mA, 0/1-5 V, 0/2-10 V Output Signal.
• Modbus Output
• Field Automatic Calibration.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.
• Fully programmable operating parameters.
• High Reliability, SMD components.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

SIL level:

SIL 2

Data sheet:
DTS0239 D1064S data sheet (English) (PDF 281 KB)
Instruction manual:
ISM0088D1064S Instruction manual (PDF 499 KB)
ISM0102General D1000 Series Instruction Manual (PDF 2.39 MB)
ISM0155General D1000 Series Safety Instruction Manual (PDF 3.35 MB)
ISM0312D1064S safety manual (PDF 210 KB)
Certifications:
CRT003ATEX certificate n. DMT 01 ATEX E 042 X (I.S.) (PDF 9.52 MB)
CRT014Metrological Certificate for D1000 Series (Russia) (PDF 779 KB)
CRT020FM 3024643 (USA) & FM-C 3029921C (Canada) (PDF 3.42 MB)
CRT032IECEx CoC for D1000 Series (I.S.) [link IECEx BVS 07.0027X] (PDF 2.80 MB)
CRT047ATEX certificate n. IMQ 09 ATEX 013 X (non-sparking) (PDF 160 KB)
CRT125IECEx CoC for D1000 Series (non-sparking) [link IECEx IMQ 13.0011X] (PDF 122 KB)
CRT142TÜV SIL Certificate Summary (PDF 919 KB)
CRT175INMETRO Certificate DNV 13.0108X (PDF 843 KB)
CRT179DNV Maritime Type Approval Certificate (D1000 Series) (PDF 2.06 MB)
CRT192TRCU Certificate for D1000 Series (PDF 3.15 MB)
CRT216Ukraine certificate for D1000 series (PDF 3.50 MB)
Application notes:
APN0007Universal AC Power Supply for Series D1000 (PDF 44 KB)
Software:
SWC1090D1000 and E1000 Software Configurator for Windows
Accessories:
BUSPower Bus Optional Enclosure
CABF012Dedicated cable for load cell 3x2x1 mm2 with 3+overall screen
MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
MOR016DIN Rail End Stopper Terminal Block
MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
PPC1090Pocket Portable Configurator for D105* D106* D107*
PPC1092D1000 Series Serial Adapter Configurator.
USBADAPTRS-232 to USB Adapter.
Various:
2D drawing of D1000 Series in DWG format (DWG 118 KB)
3D drawing of D1000 Series in DWG format (DWG 3.49 MB)
3D drawing of D1000 Series in STEP format (STEP 1.65 MB)
Conformal Coating Declaration (PDF 135 KB)
D1000 Dimensional Drawing (PDF 220 KB)
EU Declaration of Conformity DTS0249 (PDF 280 KB)
EU Declaration of Conformity DTS0251 (PDF 261 KB)
REACh, RoHS Declaration of Conformity (PDF 150 KB)
News: [Certifications] IECEx Certifications for D1000 Series now available
[Products] D1064S Load Cell / Strain Gauge Bridge Isolating Converter

D1064S - Load Cell/Strain Gauge Bridge Isolating Converter

Click to enlarge
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.


Home | Products | Download | Contacts | Site map
Products:
©

G.M. International srl

Via G. Mameli, 53-55
I-20852 Villasanta (MB)
ITALY
Tel: +39 039 2325038
Fax: +39 039 2325107

P. IVA / C.F. : 02312650969
REA: MI1418125
Cap. Soc.: 93600 €